HYDRO MARK water based tree marking paint

In stock

HYDROMARK is a water-based formulation (includes more than 25% water). It is especially suitable for medium- and long-term tree marking (1 to 2 years) and designation and stand boundary marking.

More details


Data sheet

Product TypeWood Marking Spray
Type of paintNon fluorescent paint
Marking time1 to 2 years
Volume500 ml
PackagingBox of 12 aerosols
BrandSOPPEC

Download

More info


HYDRO MARK : THE NON FLUORESCENT TREE MARKING PAINT
FOR A LONG LASTING & ENVIRONMENTALLY FRIENDLY MARKING

 

 

Properties of the HYDRO MARK water based tree marking spray paint 

 

  • Marking duration of 1-2 years (depending on application conditions and type of surface)
  • More environmentally-friendly thanks to its water-based formulation
  • Temperature range: 5°C to 50°C
  • Recommended relative humidity level < 85%, the paint remains sensitive to water (rain) until it is completely dry
  • Can be used on all tree species, young or old
  • Odourless
  • Drying time (1 hr to 2 hr depending on the condition of the surface)

 

Specifications of the HYDRO MARK FLUO Environmentally friendly spray marker

 

Composition

Binder: specific polymers
Water: between 25% and 28% depending on the colour
Pigments: mineral and organic, lead and cadmium-free
Solvents: complex blend free from chlorinated solvents and without aromatic compounds
Propellant: dimethyl ether (DME)

Application method

Manually or using our purpose-designed application equipment (forestry grip), see bellow.
Before use (head up): shake vigorously
After use: purge head down.

Do not apply to wet surfaces or at temperatures below 5°C

Health and safety

No paint mist or drips during use.
CLP labelling with two pictograms.

DANGER

Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.

picto inflammablepicto dangereux

 

 

Safety Data Sheet

 

GET THE SAFETY DATASHEET


Related Products