Laque de retouche alkyde View larger

Alkyd Industrial Top Coat

In stock

Formulated with modified alkyd resins to ensure a very high covering power, excellent gloss finish and long life. They are particularly scratch and impact resistant. In addition, a clear alkyd resin finishing paint is also available and can be applied as a protective coat for even greater shine.

More details


Data sheet

Product TypeIndustrial paints
Volume400 ml
PackagingBox of 12 aerosols
BrandSOPPEC

Download

More info


Standard references available on stock in 400 ml.

Availability in other RAL colours on demand and under conditions of quantity, cost and delivery :

  • References in 400 ml : 38...

 

Colors of the Alkyd Touch Up Paint

 

RAL 1004
golden yellow

REF : 381004B

RAL 1007
daffodil yellow

REF : 381007B

RAL 1018
zinc yellow

REF : 381018B

RAL 2000
yellow orange

REF : 382000B

RAL 2002
vermilion

REF : 382002B

RAL 3000
flame red

REF : 383000B

RAL 3020
traffic red

REF : 383020B

RAL 4001
red lilac

REF : 384001B

RAL 5010
gentian blue

REF : 385010B

RAL 5015
sky blue

REF : 385015B

RAL 6001
emerald green

REF : 386001B

RAL 6005
moss green

REF : 386005B

RAL 6009
fir green

REF : 386009B

RAL 6018
yellow green

REF : 386018B

RAL 7001
silver grey

REF : 387001B

RAL 7005
mouse grey

REF : 387005B

RAL 7012
basalt grey

REF : 387012B

RAL 7016
anthracite grey

REF : 387016B

RAL 7035
light grey

REF : 387035B

RAL 9001
signal white

REF : 389001B

RAL 9005
jet matt black

REF : 389005M

RAL 9005
jet black glossy

REF : 389005M

RAL 9006
white aluminium

REF : 389006B

RAL 9010
pure white matt

REF : 389010M

RAL 9010
pure white glossy

REF : 389010B

RAL 9016
traffic white

REF : 389016B

 

Properties of the Alkyd Touch Up Paint

 

  • Excellent adhesion and high covering power
  • Heat resistance: 110°C
  • Dust dry: 10 to 20 minutes
  • Touch dry: 30 to 60 minutes
  • Completely dry: 24 to 48 hours
  • Coverage: approximately 2m² per can

(Figures given for information only, actual data’s will depend on the temperature, paint thickness, humidity etc)

 

Specifications of the Alkyd Touch Up Paint 

 

Composition
Professional grade paint
Binder: modified alkyd resins
Solvent: blend of solvents, free from lead and heavy metals Propellant: dimethyl ether

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with two pictograms.

DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

picto inflammablepicto dangereux

 

Instructions for use

  • Thoroughly shake the aerosol for at least 2 minutes before use to ensure the pigments are correctly mixed.
  • The surface must be clean, dry and free from grease. Degrease the surface to be treated, remove rust, dust and any residual paint. To improve adhesion, it is recommended to apply an undercoat before use, depending on the condition of the surface to be treated.
  • Spray at a distance of 25 cm from the surface. Best results are obtained by applying several thin coats in different directions rather than a single thick coat. Leave to dry for approximately 30 minutes between coats.
  • If appropriate, carry out a test on an unobtrusive area beforehand to verify paint compatibility.