View larger
Paint Stripper
The Soppec PRO TECH Stripper acts rapidly and intensely for a powerful effect. Ideal to remove alkyd resin-based paint or aqueous phase epoxy and polyurethane coatings, even if bicomponent, etc. Can be applied to almost all surfaces.
On stock
Data sheet
| Product Type | Technical products |
| Volume | 500 ml |
| Packaging | 12 per box |
| Brand | SOPPEC |
Download
Catalogue 2022
Discover our brand new catalogue of 2022, gathering MERCALIN and SOPPEC ranges : Construction, Line marking, Event, Pro Tech, Colors, Forest and all our accessories.
Download (7.34M)More info
Specifications of the Paint stripper spray
- Packaging: 500 ml
- Composition: blend of solvents and paraffin wax, free from methylene chloride
- Propellant: DME
- VOC-EU g/l: 794 g/l
- Relative density (20°C g/ml): 0.794
- Vapour pressure at 20°C: 3.3 - 3.9 bar
- Spray flow: 2.5 g/sec
- pH: neutral
- Usage/ dosage: 2-3 m2/kg, depending on usage
Health and safety
CLP labelling with one pictogram.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
Instructions of use of the Paint stripper spray
Do not use the paint stripper spray at temperatures below 5°C. The surface should not include any frozen areas. Under low temperatures, the product has a slower action. Protect adjacent areas by covering. Apply a sufficiently thick layer of the paint stripper to the surface to be treated and leave to act for at least 15 minutes. Adjust the action time as necessary to eliminate bicomponent coatings. Brush or clean the sprayer with warm water using appropriate pressure. Remove any dissolved paint residues with a scraper or spatula. Repeat the treatment as necessary. Rinse with water.
Safety Data Sheet