Seal and bond remover
search
  • Seal and bond remover

Seal and Bond Remover

Reference : 900134

The Soppec PRO TECH mastic and adhesive remover dissolves glue, tar, mastic and silicone residues easily and quickly. The ideal
solution for degreasing surfaces prior to other treatment. Will leave the majority of painted surfaces and synthetic materials undamaged, leaves no residue.

See product's full description

Seal and Bond Remover

Volume: 500 ml

Contact us

Specifications of the Seal and bond remover 

  • Packaging: 500 ml
  • Composition: blend of aromatic and aliphatic hydrocarbons and alcohols
  • Appearance: colourless clear liquid
  • Propellant: CO2
  • VOC-EU g/l: 774 g/l
  • Relative density (20°C g/ml): 0.794
  • Vapour pressure at 20°C: 5.2 - 5.8 bar
  • Spray flow: 3.4 g/sec

 

Technical sprays - EN

Download (4.25MB)

Tekniska sprayer - SV

Download (3.81MB)

900134

Data sheet

Product Type
Technical product
Volume
500 ml
Packaging
12 per box
Brand
SOPPEC

Instructions of use of the Seal and bond remover 

Shake thoroughly before use. Apply to a clean dry cloth and treat the surface. Leave to act for a few minutes then remove the residues. Repeat the treatment if necessary, notably for thick layers of adhesive or hardened glue. For painted or plastic surfaces, it is strongly recommended to carry out a test beforehand to ensure compatibility.

 

Health and safety

CLP labelling with two pictograms.

DANGER

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

picto inflammablepicto dangereux

 

Safety Data Sheet

 

GET THE SAFETY DATASHEET