Polyurethane foam cleaner View larger

Polyurethane Foam Cleaner

The Soppec PRO TECH Polyurethane Foam Cleaner is designed to remove fresh PUR (polyurethane) foam after general work operations. It will also remove glue, wax, grease and oil residues, etc. It includes a spray and additional connector designed for using to clean a PUR spray gun thus extending its working life.

More details

On stock

Get the safety datasheet

Data sheet

Product Type Technical products
Volume 400 ml
Packaging 12 per box


Catalogue 2022

Discover our brand new catalogue of 2022, gathering MERCALIN and SOPPEC ranges : Construction, Line marking, Event, Pro Tech, Colors, Forest and all our accessories.

Download (7.34M)

More info

Specifications of the Polyurethane Foam Cleaner


  • Packaging: 400 ml
  • Composition: acetone
  • Appearance: colourless clear liquid
  • Propellant: propane-butane
  • VOC-EU g/l: 715 g/l
  • Relative density (20°C g/ml): 0.715
  • Vapour pressure at 20°C: 3.1 bar
  • Spray flow: 2.5 g/sec


Health and safety

CLP labelling with a single pictogram.


H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

picto inflammablepicto dangereux


Instructions of use of the Polyurethane Foam Cleaner


Shake thoroughly before use. Soppec Polyurethane Foam Cleaner may not be compatible with certain painted and plastic surfaces, we therefore recommend carrying out a test beforehand.

To remove fresh PUR foam

Place the nebuliser on the aerosol valve and maintain in a vertical position. Spray abundantly onto the foam residues. Leave to act for several minutes then remove the foam. Repeat if necessary.

To clean a foam gun

Screw the aerosol onto the gun adapter (do not fit the nebuliser) and squeeze the gun trigger several times to fill it with the PUR cleaner. Continue until foam is no longer produced. Leave the PUR Cleaner for about 10 minutes and then action the spray gun.


Safety Data Sheet