Polyurethane foam cleaner
search
  • Polyurethane foam cleaner

Polyurethane Foam Cleaner

Reference : 900007

The Soppec PRO TECH Polyurethane Foam Cleaner is designed to remove fresh PUR (polyurethane) foam after general work operations. It will also remove glue, wax, grease and oil residues, etc. It includes a spray and additional connector designed for using to clean a PUR spray gun thus extending its working life.

Polyurethane Foam Cleaner

Volume: 400 ml

Contact us

Specifications of the Polyurethane Foam Cleaner

 

  • Packaging: 400 ml
  • Composition: acetone
  • Appearance: colourless clear liquid
  • Propellant: propane-butane
  • VOC-EU g/l: 715 g/l
  • Relative density (20°C g/ml): 0.715
  • Vapour pressure at 20°C: 3.1 bar
  • Spray flow: 2.5 g/sec

 

Technical sprays - EN

Download (4.25MB)

Tekniska sprayer - SV

Download (3.81MB)

900007

Data sheet

Product Type
Technical product
Volume
400 ml
Packaging
12 per box
Brand
SOPPEC

Instructions of use of the Polyurethane Foam Cleaner

 

Shake thoroughly before use. Soppec Polyurethane Foam Cleaner may not be compatible with certain painted and plastic surfaces, we therefore recommend carrying out a test beforehand.

To remove fresh PUR foam

Place the nebuliser on the aerosol valve and maintain in a vertical position. Spray abundantly onto the foam residues. Leave to act for several minutes then remove the foam. Repeat if necessary.

To clean a foam gun

Screw the aerosol onto the gun adapter (do not fit the nebuliser) and squeeze the gun trigger several times to fill it with the PUR cleaner. Continue until foam is no longer produced. Leave the PUR Cleaner for about 10 minutes and then action the spray gun.

 

Health and safety

CLP labelling with a single pictogram.

DANGER

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

picto inflammablepicto dangereux

 

Safety Data Sheet

 

GET THE SAFETY DATASHEET