Lubricant PTFE dry View larger


A high quality PTFE dry lubricant for mechanical components in metal or synthetic materials that need protection against oil and grease residues. The product forms a dry anti-static film that is virtually invisible, eliminating problems caused by friction on start-up and due to slipping.It is resistant to weather, acids and soft alkalis; it is water-repellent and pH neutral.

More details

On stock

Get the safety datasheet

Data sheet

Product Type Technical products
Volume 500 ml
Packaging 12 per box


Catalogue 2022

Discover our brand new catalogue of 2022, gathering MERCALIN and SOPPEC ranges : Construction, Line marking, Event, Pro Tech, Colors, Forest and all our accessories.

Download (7.34M)

More info

Our dry PTFE spray offers a very low friction coefficient, an almost smooth texture, with particles of approximately 5 micrometres, together with very good adhesion.  It therefore reduces wear and seizure for machine and equipment parts, conveyor belts, guide rails, machinery/agricultural parts.


Specifications of the PTFE dry lubricant


  • Packaging: 500 ml
  • Composition: PTFE dispersion, polymers in alcoholic solvents
  • Appearance: clear, slightly cloudy liquid
  • Propellant: propane-butane
  • VOC-EU g/l: 598 g/l
  • Relative density (20°C g/ml): 0.604
  • Vapour pressure at 20°C: 4 - 5 bar
  • Spray flow: 1.1 g/sec
  • Particle size: 3.7 μm
  • Drying time: approximately 5 minutes
  • Withstands temperatures: -180°C to +260°C


Health and safety

CLP labelling with two pictograms.


H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

picto inflammablepicto dangereux


Instructions of use of the PTFE dry lubricant


Shake well the PTFE dry lubricant before using and apply a thin layer of Dry PTFE. A dry PTFE film is formed following evaporation of the solvent (approximately 5 minutes).


Safety Data Sheet