S-COLOR
search
  • S-COLOR

S-COLOR

Acrylic touch-up paint

Reference : 424142

  • Good covering power
  • Fast drying
  • Multi-surface

S-COLOR

RAL color: RAL 9010 Mat

See more

See less

Volume: 400 ml
Sales unit: 1 box of 6

Contact us

 S-COLOR is an acrylic paint specially suited to regular touch-up works. Its quality of application and fast drying make touch-ups quick and easy.

S-COLOR can be applied to many surfaces: wood, terracotta, stone, wicker, etc. For metal surfaces, plastic surfaces and porous surfaces; it is advisable to apply a suitable primer beforehand. 

S-COLOR advantages

  • Good coverage
  • Fast drying
  • Multi-surfaces
  • Interior and Exterior

Treatment of surfaces before painting

Apply to clean, degreased, dust-free and dry surfaces. Use acetone to degrease your surfaces. Protect/mask surrounding areas that are not to be painted.

  • Varnished or painted surfaces: lightly sand the surface first to facilitate adhesion.
  • Metal surfaces: remove any rust beforehand.
  • Metal surfaces for outdoor use: apply an anti-rust primer coat beforehand.

  

Colorchart

FT-SOPPEC-S-COLOR-FR

Download (279.06KB)

FT-SOPPEC-S-COLOR-EN

Download (230.99KB)

424142

Data sheet

Volume
400 ml
Product type
Touch up paint
Application domain
Maintenance, retouch
Application area
Woods, Gravels, Bitumens, Concrete
Packaging
Box of 6 cans

Specific References

ean13
3598300027546

Instruction for use

  • Thoroughly shake the aerosol for at least 2 minutes before use to ensure the pigments are correctly mixed.
  • The surface must be clean, dry and free from grease. Degrease the surface to be treated, remove rust and dust.
  • Spray at a distance of 25 cm from the surface.
  • Best results are obtained by applying several thin coats in different directions rather than a single thick coat.
  • Coverage approximately 2m² per can according to the application conditions and the state of the surface to be treated.
  • If appropriate, carry out a test on an unobtrusive area beforehand to verify the compatibility of the paint with the surface.

CLP labelling with two pictograms.

Dangerous. Follow the precautions.

ACETONE
H222 Extremely flammable aerosol.
H229 Pressurized container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

Safety data sheets are available free of charge on the internet: www.quick-fds.com.