Primaire d'accroche
  • Primaire d'accroche

Adhesion primer

Reference : 470103

High quality universal primers, offering rapid drying and high coverage, ideal for surface preparation (metal, wood, plastic and many others) before paint-spraying. Can be used on bare steel and lightly rusted surfaces. Also suitable for plastic and wood.

See product's full description

Adhesion primer

Color: Grey
Volume: 500 ml

Contact us

Properties of the Adhesion primer


  • Excellent adhesion (for both smooth and porous surfaces), covers well and is easy to sand.
  • Corrosion-resistant
  • Heat resistance: 110°C
  • Dust dry after 10 to 15 minutes
  • Touch dry after 15 to 25 minutes
  • Leave to dry for 12 hours between coats

(Figures given for information only, actual data’s will depend on the temperature, paint thickness, humidity etc)


Specifications of the Adhesion primer 


Binder: acrylic
Solvent: blend of solvents
Propellant: dimethyl ether

Adhesion Primer - EN

Download (978.57KB)

Adhesion Primer - SV

Download (974.77KB)


Data sheet

Product Type
Touch up paint
500 ml
Box of 12 cans

Instructions for use


  • Thoroughly shake the aerosol for at least 2 minutes before use to ensure the pigments are correctly mixed.
  • The surface must be clean, dry and free of grease. Remove all residues of varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface. Cover the surrounding areas.
  • Spray at a distance of 25 cm from the surface. Best results are obtained by applying several thin coats in different directions rather than a single thick coat.
  • Leave to dry for approximately 20 minutes between coats.

Health and safety

CLP labelling with three pictograms.


H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

picto inflammablepicto dangereux



Safety Data Sheet