Convertisseur de rouille View larger

Rust Convertor

The Soppec Colors rust converter is a “two-in-one” product, stabilising the rust and acting as a primer. Ideal for restoring rusted areas of paintwork on machinery, vehicles or other metal equipment: fencing, chassis, etc. Thanks to its deep penetration, it forms a high quality protective film, making this an effective and long-lasting treatment.

More details

On stock

Get the safety datasheet


Data sheet

Product Type Industrial paints
Volume 500 ml
Packaging Box of 12 aerosols
Brand SOPPEC

Download

Catalogue 2022

Discover our brand new catalogue of 2022, gathering MERCALIN and SOPPEC ranges : Construction, Line marking, Event, Pro Tech, Colors, Forest and all our accessories.

Download (7.34M)

More info


Properties of the Rust Convertor

 

  • Application temperature: max 80°C, peak 150°C
  • Dust dry after approximately 30 minutes
  • Leave to dry for 5 hours between coats (Figures given for information only, actual times will depend on the temperature, paint thickness, humidity etc)
  • Vapour pressure at 20°C: 4 bar
  • pH: 4 - 4.5
  • Spray flow: 0.8 g/sec.

 

Specifications of the Rust Convertor 

 

Composition
Binders: blend of polyvinyl butyral, resins and solvents, free from heavy metals and mineral acids
Colour: clear brown liquid, on metal it turns dark blue/black once dry
Propellant: dimethyl ether

Health and safety

CLP labelling with four pictograms.

DANGER

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

picto inflammablepicto dangereuxpictograme-corrosif.jpg

 

Instructions for use

 

  • Shake thoroughly before use.
  • Remove any paint and rust residues with a metal brush or sander. The surface must be clean, dry and free of grease. When using outdoors, remove any moss or algae present on the surface. Cover the surrounding areas.
  • Spray at a distance of 25 cm from the surface.
  • Apply several light coats (+/- 4 coats).
  • Leave to dry for approximately 20 minutes between coats.
  • Once the final coat is completely dry, it is recommended to sand the surface to improve adhesion.

 

Safety Data Sheet

 

GET THE SAFETY DATASHEET