Heat resistant coating
Reference : 470802
Heat-resistant paints that can be used on surfaces exposed to very high temperatures such as: steam pipes, engines, exhaust pipes, radiators, etc. They can be used to coat new, bare, shot, rusted or painted steel, as long as it has been correctly prepared before applying the HT paint.
Heat resistant coating
Properties of the Heat resistant coating
- Excellent adhesion
- High resistance to petrol and chemicals
- Heat resistant up to a peak temperature of 650°C
- Dust dry after 5 to 10 minutes
- Touch dry after 10 to 15 minutes
- Completely dry after curing for 30 to 60 minutes at 200°C
(Figures given for information only, actual times will depend on the temperature, paint thickness, humidity etc)
Specifications of the Heat resistant coating
Composition
Binder: silicone resin
Pigments: Heat resistant colour pigments
Propellant: dimethyl ether
470802
Data sheet
- Product Type
- Touch up paint
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Brand
- SOPPEC
Instructions for use
The surface must be clean, dry and free of grease. Remove all residual paint, varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface. Cover the surrounding areas. Shake from time to time during use. Spray at a distance of approximately 25 to 30 centimetres from the surface. When dry, heat to a temperature of at least 200°C for 30 to 60 minutes to fully harden the paint coating.
Health and safety
CLP labelling with two pictograms.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.
Safety Data Sheet
Heat-resistant paints that can be used on surfaces exposed to very high temperatures such as: steam pipes, engines, exhaust pipes, radiators, etc. They can be used to coat new, bare, shot, rusted or painted steel, as long as it has been correctly prepared before applying the HT paint.