Peinture haute température
  • Peinture haute température

Heat resistant coating

Reference : 470800

Heat-resistant paints that can be used on surfaces exposed to very high temperatures such as: steam pipes, engines, exhaust pipes, radiators, etc. They can be used to coat new, bare, shot, rusted or painted steel, as long as it has been correctly prepared before applying the HT paint.

See product's full description

Heat resistant coating

Color: Grey
Volume: 500 ml

Contact us

Properties of the Heat resistant coating


  • Excellent adhesion
  • High resistance to petrol and chemicals
  • Heat resistant up to a peak temperature of 650°C
  • Dust dry after 5 to 10 minutes
  • Touch dry after 10 to 15 minutes
  • Completely dry after curing for 30 to 60 minutes at 200°C

(Figures given for information only, actual times will depend on the temperature, paint thickness, humidity etc)


Specifications of the Heat resistant coating 


Binder: silicone resin
Pigments: Heat resistant colour pigments
Propellant: dimethyl ether

Heat resistant - EN

Download (953.47KB)

Heat resistant - SV

Download (949.82KB)


Data sheet

Product Type
Touch up paint
500 ml
Box of 12 cans

Instructions for use


The surface must be clean, dry and free of grease. Remove all residual paint, varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface. Cover the surrounding areas. Shake from time to time during use. Spray at a distance of approximately 25 to 30 centimetres from the surface. When dry, heat to a temperature of at least 200°C for 30 to 60 minutes to fully harden the paint coating.


Health and safety

CLP labelling with two pictograms.


H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.

picto inflammablepicto dangereux


Safety Data Sheet