PTFE
Reference : 930004
A high quality PTFE lubricant that ensures good lubrication over a long period. Unblocks seized metal or plastic parts; has low friction resistance and is moisture-repellent thus protecting against corrosion. It offers good penetration and good resistance to high pressure.
PTFE
This PTFE lubricant can be used for any parts with a rolling or sliding movement whether in a dry or damp environment : cogwheels, gearing, hinges, machine tools, etc.
Specifications of the PTFE lubricant
- Packaging: 500 ml
- Composition: blend of aliphatic hydrocarbons and alcohols
- Appearance: clear liquid
- Propellant: CO2
- VOC - CH%: 96%
- VOC-EU g/l: 725 g/l
- Relative density (20°C g/ml): 0.758
- Vapour pressure at 20°C: 5.0 - 5.5 bar
- Spray flow: +/-3.5 g/sec
930004
Data sheet
- Product Type
- Technical product
- Volume
- 400 ml
- Packaging
- 12 per box
- Brand
- SOPPEC
Instructions of use of the PTFE lubricant
Shake the PTFE spray before use and apply a thin layer of PTFE. Best lubrication is obtained after evaporation of the solvent (approximately one minute).
Health and safety
CLP labelling with two pictograms.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H336 May cause drowsiness or dizziness.
Safety Data Sheet
A high quality PTFE lubricant that ensures good lubrication over a long period. Unblocks seized metal or plastic parts; has low friction resistance and is moisture-repellent thus protecting against corrosion. It offers good penetration and good resistance to high pressure.