Spack Spray
Reference : 470011
Polyurethane dispersion based paint that creates a “cement” effect finish. Particularly useful to touch-up cement coatings or renders. Can be applied to a wide range of building surfaces: wood, cement, plastic.
Spack Spray
Properties of the Spack Spray
- Colour: white
- Density at 20°C: 1.2
- Rapid drying
- Can be used in addition to a stain block paint when preparing a surface prior to painting.
Specifications of the Spack Spray
Composition
Binders: polyurethane dispersion
Propellant: dimethyl ether
470011
Data sheet
- Product Type
- Marking complement
- Volume
- 500 ml
- Packaging
- Box of 12 cans
- Brand
- SOPPEC
Instructions for use
The surface must be clean, dry and free of grease. Remove all residual paint, varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface. Cover the surrounding areas. Shake from time to time during use. Spray at a distance of approximately 25 to 30 centimetres from the surface. Paint can be applied in a thin or thick coat according to the touch-up work required. Apply at a temperature between 10°C and 30°C. The viscosity of the paint varies according to temperature and the texture may thicken at temperatures below 10°C.
Health and safety
CLP labelling with one pictogram.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
Safety Data Sheet
Polyurethane dispersion based paint that creates a “cement” effect finish. Particularly useful to touch-up cement coatings or renders. Can be applied to a wide range of building surfaces: wood, cement, plastic.