Peinture aspect ciment
  • Peinture aspect ciment

Spack Spray

Reference : 470011

Polyurethane dispersion based paint that creates a “cement” effect finish. Particularly useful to touch-up cement coatings or renders. Can be applied to a wide range of building surfaces: wood, cement, plastic.

See product's full description

Spack Spray

Volume: 500 ml

Contact us

Properties of the Spack Spray


  • Colour: white
  • Density at 20°C: 1.2
  • Rapid drying
  • Can be used in addition to a stain block paint when preparing a surface prior to painting.


Specifications of the Spack Spray 


Binders: polyurethane dispersion
Propellant: dimethyl ether

Technical sprays - EN

Download (4.25MB)

Tekniska sprayer - SV

Download (3.81MB)


Data sheet

Product Type
Marking complement
500 ml
Box of 12 cans

Instructions for use


The surface must be clean, dry and free of grease. Remove all residual paint, varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface. Cover the surrounding areas. Shake from time to time during use. Spray at a distance of approximately 25 to 30 centimetres from the surface. Paint can be applied in a thin or thick coat according to the touch-up work required. Apply at a temperature between 10°C and 30°C. The viscosity of the paint varies according to temperature and the texture may thicken at temperatures below 10°C.


Health and safety

CLP labelling with one pictogram.


H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.

picto inflammable


Safety Data Sheet